Drumroll Please…

Last time I updated you guys on Ducky I had just started coloring the face. Since then I’ve done a lot more work. I finished coloring the brow bones and the cheeks.60 Ducky finished coloring brow and working on coloring cheeks

Then I worked on coloring the rest of the head.

61 Ducky working on coloring back of head

Once the coloring was done I was able to attach the crest to the top of the head. That was one of the very first pieces I made and I only needed to add a bit of bulk on the bottom to get the proportion correct! I also defined the nose shape a bit more and decided on the ear placement by sticking pins in their place and adjusting them until they looked symmetrical.

62 Ducky crest attached nose shaped and decided ear placement

The ears were a bit small at first so I added just a tad bit more wool to bulk them up before attaching them. After that I worked on the most nerve-wracking part of this whole project – the eyes. All along I’ve been telling myself that as long as I get the eyes right all the other imperfections will be less noticeable. Of course the converse of that logic is that if I DON’T get the eyes right the while thing will look like a mess. Fortunately I think I nailed it! I finished the eyes and started working on the eyelashes.

63 Ducky ears attached colored eyes and working on eyelashes

Once I got the eyelashes done I added the nostrils, and with that Ducky’s face was done!

64 Ducky eyelashes and nostrils done

All that was left to do was the arms. I left that step for last because I thought they would get in the way when I was working on the fine detail work on the face. I did end up needing to manipulate Ducky quite a bit in order to get the details right, so my instinct was spot-on. I used pins to work out the arm positions and started building the basic shapes for the shoulder joints with some yellow wool.

65 Ducky decided on arm placement and started building shoulders

I attached the arms by making a doughnut shape on the body and then inserting the end of the arm into the middle and felting it in place. By alternating between stabbing the end of the arm directly into the body and stabbing the raised parts of the shoulder into the arm I was able to make a very secure connection. Due to how thin the arms are they still can be moved around a bit, but they certainly aren’t going to fall off. Once the arms were firmly in place I started coloring the shoulders with the last bits of light green wool.

66 Ducky arms attached and coloring shoulders

I finished coloring the shoulders, made some final adjustments to the angles of the arms and ankles, trimmed off any fly-away bits of wool and with that Ducky was finished! She even stands up!

67 Ducky is finished

It’s pretty damn close to my reference picture too!

I learned a ridiculous amount from needle felting Ducky and she was well worth all the time and effort. Now that I’ve finished Ducky I know I can make anything. BOW TO ME FOR I AM THE GOD OF NEEDLE FELTING.

I took a ton of pictures in the light box, so here is Ducky from every angle possible:

Ducky 1 Ducky 2 Ducky 3 Ducky 4 Ducky 5 Ducky 6 Ducky 7 Ducky 8 Ducky 9 Ducky 10 Ducky 11 Ducky 12 Ducky 13 Ducky 14 Ducky 15 Ducky 16 Ducky 17 Ducky 18 Ducky 19 Ducky 20 Ducky 21 Ducky 22 Ducky 23 Ducky 24 Ducky 25 Ducky 26 Ducky 27 Ducky 28 Ducky 29 Ducky 30 Ducky 31 Ducky 32 Ducky 33 Ducky 34 Ducky 35 Ducky 36 Ducky 37 Ducky 38

Advertisements

WIP-Cracking Wednesday: Zooming, Bombing, and Sculpting

WARNING: This post contains a ridiculous number of pictures.

Part 1: Zooming

The photo prompt today was “extreme close up,” which is what I frequently seem to do anyway. This time I decided to see just how close I could get.

Staging and lighting: While I was out and about I decided to zoom in on an art installation. It was about 3 pm and partly cloudy. I took the photo about an inch away from the surface of the piece.

IMG_5273

Just for fun, I Instagrammed the full photo of the art piece too. I like it better than the reference photo.

IMG_5277

Anyway, back to the actual challenge photo…

Instagram edits: Lux, Mayfair filter and border

Computer edits: cropped, enhanced, increased definition and sharpness to the max

edited with iPhoto

edited with iPhoto

It’s hard to go wrong with something this abstract, but for the Instagram version I went with the filter that gave the biggest range of colors without darkening the photo. For the computer edit I wanted to bring out all the cool bubble shapes in the glass, so that’s why I pumped up the definition and sharpness. They both turned out awesome!

Part 2: Bombing

You may have noticed that for once my challenge photo is not in my house or my backyard. The reason I was lured out of my cave in the first place was because I needed to do a fitting for my yarnbombing. I have a whole section seamed together at this point, and many more pieces pinned together, but I needed to actually put those pieces up on the light pole to see how they all might fit together and how much more I need to do.

IMG_5261

The main section I have seamed together fits on the lower part of the base quite nicely. I just need to smooth out the edges.

IMG_5257

I purposefully did not seam together enough pieces to fit all the way around the pole yet. I needed to figure out where I would stitch up the piece when installation day comes. I think I will stitch it up along the corner to the right of the tentacle.

IMG_5259

So now I just need to add about 7 inches worth of pieces to the other end of this section so it can reach the tentacle corner.

IMG_5263

This strip of swatches should help pull the bottom section in tight around the middle of the base and prevent it from slipping down.

IMG_5265

I had another strip of swatches that I wanted to use for the top of the piece to hold the whole thing up, but it didn’t quite fit around the rounded section I had initially intended it for.

IMG_5267

It fits perfectly above the rounded section though, and it should help hold the piece up even better with that lip in the way!

Part 3: Sculpting

I made a LOT of progress on Ducky this week! I worked on filling in the holes around the left cheek.

IMG_5172

Then I smoothed out the shape of the cheek.

IMG_5186

I filled out the head shape some more and started building the brow ridges.

IMG_5203

Then I attached the brow ridges and filled in the eyeballs. And with that, the sculpting of Ducky’s head was FINISHED!!!

IMG_5207

I started coloring the nose and the brow ridges.

IMG_5253

Ducky is really starting to look like Ducky!

WIP-Cracking Wednesday: Against All Odds

This has been one of those weeks. It seems like the universe has just been conspiring against me and throwing all kinds of drama my way in an attempt to disrupt my workflow – family drama, tech drama, hell, even the electricity has been giving me attitude. Despite all of that, somehow progress has been made.

The monster has a face!

IMG_4161

Now I just need to add his horns and a tail! I may even consider giving him arms.

I worked on Ducky’s back ridges some more.

IMG_4156

Once I finished with that I breathed a sigh of relief because Ducky’s body is finally the shape I want it to be! Now I’m working on coloring. I concentrated on the tail first, so this is what it looked like after adding the light green on one side.

IMG_4169

Then I added the light green to the other side of the tail and started filling in the hip area.

IMG_4173

Not nearly as productive as I wanted to be this week, but there’s only so much I can do in the face of total chaos. At least the lights are on again.